Dyeing and printing wastewater treatment using fly-ash coated with chitosan

Xin Chen; Huili Sun

doi:10.1007/s00343-009-9187-y

Your Location：

Home >

Browse articles >

Dyeing and printing wastewater treatment using fly-ash coated with chitosan

OriginalPaper | Updated：2023-05-16

- Dyeing and printing wastewater treatment using fly-ash coated with chitosan
- Dyeing and printing wastewater treatment using fly-ash coated with chitosan
- 海洋湖沼学报（英文） 2009年27卷第4期页码：875-881
- Affiliations：
  
  1. South China Sea Institute of Oceanology Chinese Academy of Sciences
  2. Graduate School Chinese Academy of Sciences
  3. Department of Chemistry and Chemical Engineering Foshan University
- Author bio：
- Funds：
  
  Supported by the Science and Technology Development Foundation of Foshan (No. 2005060071)
- DOI：10.1007/s00343-009-9187-y
  中图分类号：
- 网络首发：2009-12-04，
  
  纸质出版：2009
- Accepted：
Scan QR Code
Dyeing and printing wastewater treatment using fly-ash coated with chitosan[J]. 海洋湖沼学报（英文）, 2009,27(4):875-881.

Chen, X., Sun, H. Dyeing and printing wastewater treatment using fly-ash coated with chitosan., Chin. J. Ocean. Limnol. 27, 875–881 (2009). https://doi.org/10.1007/s00343-009-9187-y
Dyeing and printing wastewater treatment using fly-ash coated with chitosan[J]. 海洋湖沼学报（英文）, 2009,27(4):875-881. DOI： 10.1007/s00343-009-9187-y.

Chen, X., Sun, H. Dyeing and printing wastewater treatment using fly-ash coated with chitosan., Chin. J. Ocean. Limnol. 27, 875–881 (2009). https://doi.org/10.1007/s00343-009-9187-y DOI：

摘要

Abstract

Printing and dyeing industry is a considerable source of environmental contamination. In this study treatment of printing and dyeing wastewater with a new type of sewage treatment agent

fly-ash coated with chitosan particles (FCCP)

was examined. The effects of pH

stirring time

sedimentation time and temperature on color

COD

turbidity and NH3-N removal were determined. The optimum dosage of FCCP and the influence of individual factors on removal efficiency were tested. The optimum parameters determined using the L16(45) orthogonal experiment were as follows: FCCP (weight ratio of chitosan to fly-ash 1:6) dosage

4 g·L−1; temperature

35°C; pH

4. The stirring time and sedimentation time were 20 min and 5 h

respectively. Under these optimum conditions

the color

COD and NH3-N removal ratios were 97%

80% and 75%

respectively.

关键词

Keywords

references

Chen L, Gao L, Chen D H. 2001. Study on adsorption kinetics of dyes by chitosan. Shanghai Environment Sciences, 20(3), 140–142.

Hu J Z, Chen D H. 2002. The application of chitosan in the water treatment. Fijian Environment, 19(3), 26–28.

Li W Y, Deng Q L. 2007. Progress in treatment of dyeing/printing wastewater. Textile Auxiliaries, 24(2), 5–7.

Ming Y A, Lu X H. 2003. Progress in treatment technology of dyeing and printing waster. Industrial and Environment Protection, 29(8), 16–19.

Xiang H Q, Mei Z J, Zhang S M. 2005. Application of fly ash in the treatment of printing and dyeing water. Dyestuffs and Coloration, 42(2), 60–62.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

暂无数据