Array processing—a new method to detect and correct errors on array resistivity logging tool measurements

Philip D. Rabinowitz; Zhiqiang Zhou

doi:10.1007/s00343-007-0051-7

Your Location：

Home >

Browse articles >

Array processing—a new method to detect and correct errors on array resistivity logging tool measurements

OriginalPaper | Updated：2023-05-16

- Array processing—a new method to detect and correct errors on array resistivity logging tool measurements
- Array processing—a new method to detect and correct errors on array resistivity logging tool measurements
- 海洋湖沼学报（英文） 2007年25卷第1期页码：51-58
- Affiliations：
  
  Department of Geology and Geophysics Texas A&M University
- Author bio：
- Funds：
- DOI：10.1007/s00343-007-0051-7
  中图分类号：
- 纸质出版：2007
- Accepted：
Scan QR Code
Array processing—a new method to detect and correct errors on array resistivity logging tool measurements[J]. 海洋湖沼学报（英文）, 2007,25(1):51-58.

Rabinowitz, P.D., Zhou, Z. Array processing—a new method to detect and correct errors on array resistivity logging tool measurements., Chin. J. Ocean. Limnol. 25, 51–58 (2007). https://doi.org/10.1007/s00343-007-0051-7
Array processing—a new method to detect and correct errors on array resistivity logging tool measurements[J]. 海洋湖沼学报（英文）, 2007,25(1):51-58. DOI： 10.1007/s00343-007-0051-7.

Rabinowitz, P.D., Zhou, Z. Array processing—a new method to detect and correct errors on array resistivity logging tool measurements., Chin. J. Ocean. Limnol. 25, 51–58 (2007). https://doi.org/10.1007/s00343-007-0051-7 DOI：

摘要

Abstract

In recent years more and more multi-array logging tools

such as the array induction and the array lateralog

are applied in place of conventional logging tools resulting in increased resolution

better radial and vertical sounding capability and other features. Multi-array logging tools acquire several times more individual measurements than conventional logging tools. In addition to new information contained in these data

there is a certain redundancy among the measurements. The sum of the measurements actually composes a large matrix. Providing the measurements are error-free

the elements of this matrix show certain consistencies. Taking advantage of these consistencies

an innovative method is developed to detect and correct errors in the array resistivity logging tool raw measurements

and evaluate the quality of the data. The method can be described in several steps. First

data consistency patterns are identified based on the physics of the measurements. Second

the measurements are compared against the consistency patterns for error and bad data detection. Third

the erroneous data are eliminated and the measurements are re-constructed according to the consistency patterns. Finally

the data quality is evaluated by comparing the raw measurements with the re-constructed measurements. The method can be applied to all array type logging tools

such as array induction tool and array resistivity tool. This paper describes the method and illustrates its application with the High Definition Lateral Log (HDLL

Baker Atlas) instrument. To demonstrate the efficiency of the method

several field examples are shown and discussed.

关键词

Keywords

references

Archie, G. E., 1942. The electrical resistivity log as an aid in determining some reservoir characteristics. J. Petroleum Technol. 5: 54–62.

Frenkel, M. A. and Z. Zhou, 2000. Improved estimation of hydrocarbon reserves using High-Definition Lateral Log array data in vertical and highly deviated wells. Presented at the 2000 SPE Annual Technical Conference and Exhibition, Dallas, Texas, October 1–4. SPE Paper 62912.

Itskovich, G. B., A. G. Mezzatesta, K. M. Strack and L. A. Tabarovsky, 1998. High-definition lateral log-resistivity device: basic physics and resolution. In: SPWLA 39th Annual Logging Symposium Transactions: Society of Professional Well Log Analysts. Paper V, 1–12.

Hakvoort, R. G., A. Fabris, M. A. Frenkel and A. M. Loermans, 1998. Field measurements and inversion results of the High-Definition Lateral Log. In: SPWLA 39th Annual Logging Symposium Transactions: Society of Professional Well Log Analysts Paper C, 1–12

Head, E. L., J. Seydoux and J. Perkins, 1993. A new technique for log quality control. In: 15th European Formation Evaluation Symposium Transactions: Society of Professional Well Log Analysts, Norwegian Chapter. Paper K, 1–12.

Jericevic, Z., A. Fabris, M. Frenkel and Z. Zhou, 2000. Robust computation of focused resistivity curves from high definition lateral log data. In: SPWLA 41st. Ann. Log. Symp. Transactions. Paper F, 1–12.

Roy, A., 1981. Focused resistivity logs. In: Fitch, A. A. editor, Developments in Geophysical Exploration Methods. Appl Sci Publ, London, New York, Chapter 3. P61–94.

Schoen, J. H., 1988. Application of numerical methods on resistivity logs. In: The 11th European Formation Evaluation Symp. Transactions. Paper S, P1–16.

Zhang, Z. and Z. Zhou, 2002. Real-time quasi-2-D inversion of array resistivity logging data using neural networks. Geophysics 67: 517–524.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Impacts of distorted fishery statistical data on assessments of three surplus production models

水下超声速气流流场非定常特性研究

双转子轴间滑油颗粒运动轨迹参数化模型

基于最大似然估计的点火概率曲线计算模型取点方法

高压涡轮封严流与主流相互作用的机理研究