Evaluation of long-term corrosion durability and self-healing ability of scratched coating systems on carbon steel in a marine environment

Xia Zhao; Changwei Chen; Weichen Xu; Qingjun Zhu; Chengyue Ge; Baorong Hou

doi:10.1007/s00343-017-6132-3

Your Location：

Home >

Browse articles >

Evaluation of long-term corrosion durability and self-healing ability of scratched coating systems on carbon steel in a marine environment

Updated：2023-05-16

- Evaluation of long-term corrosion durability and self-healing ability of scratched coating systems on carbon steel in a marine environment
- Journal of Oceanology and Limnology Vol. 35, Issue 5, Pages: 1094-1107(2017)
- Affiliations：
  
  1. Key Laboratory of Marine Environmental Corrosion and Bio-Fouling Institute of Oceanology Chinese Academy of Sciences
  2. School of Civil Engineering Qingdao Technological University
- Author bio：
- Funds：
- DOI：10.1007/s00343-017-6132-3
  CLC：
- Online First：29 September 2016，
  
  Published：2017
- Accepted：
Scan QR Code
Zhao, X., Chen, C., Xu, W. et al. Evaluation of long-term corrosion durability and self-healing ability of scratched coating systems on carbon steel in a marine environment., Chin. J. Ocean. Limnol. 35, 1094–1107 (2017). https://doi.org/10.1007/s00343-017-6132-3
DOI：

Zhao, X., Chen, C., Xu, W. et al. Evaluation of long-term corrosion durability and self-healing ability of scratched coating systems on carbon steel in a marine environment., Chin. J. Ocean. Limnol. 35, 1094–1107 (2017). https://doi.org/10.1007/s00343-017-6132-3 DOI：

摘要

Abstract

Defects in protective-coating systems on steel surfaces are inevitable in practical engineering applications. A composite coating system

including a primer

middle coat and topcoat

were used to protect carbon steel from corrosion in a marine environment. Two environmental additives

glass fibers and thiourea

were applied in the middle coat to modify the coating system. The long-term corrosion durability and self-healing ability of the scratched coating system were evaluated by multiple methods. Results of the electrochemical technologies indicated that the coating system that contained 0.5 wt.% fibers and 0.5 wt.% thiourea presented good corrosion protection and self-healing for carbon steel when immersed in 3.5% NaCl for 120 d. Evolution of localized corrosion factors with time

as obtained from the current distribution showed that fibers combined with thiourea could inhibit the occurrence of local corrosion in scratched coating systems and retarded the corrosion development significantly. Surface characterization suggested that adequate thiourea could be absorbed uniformly on fibers for a long time to play an important role in protecting the carbon steel. Finally

schematic models were established to demonstrate the action of fibers and thiourea on the exposed surface of the carbon steel and the scratched coating system in the entire deterioration process.

关键词

Keywords

references

Abdel-Rehim S S, Khaled K F, Abd-ElshafiN S. 2006. Electrochemical frequency modulation as a new technique for monitoring corrosion inhibition of iron in acid media by new thiourea derivative. Electrochim. Acta, 51(16):3269–3277.

Almeida E C, Diniz A V, Trava-Airoldi V J, Ferreira N G. 2005. Electrochemical characterization of doped diamond-coated carbon fibers at different boron concentrations. Thin Solid Films, 485 (1-2) 241–246.

Balusamy T, Nishimura T. 2016. In-situ monitoring of the local corrosion process of scratched epoxy coated carbon steel in simulated pore solution containing varying percentage of chloride ions by localized electrochemical impedance spectroscopy. Electrochim. Acta, 199: 305–313.

Blustein G, Di Sarli A R, Jaén J A, Romagnoli R, Del Amo B. 2007. Study of iron benzoate as a novel steel corrosion inhibitor pigment for protective paint films. Corros. Sci., 49(11):4202–4231.

Bonnel K, Le Pen C, Pébère N. 1999. E.I.S. characterization of protective coatings on aluminium alloys. Electrochim. Acta, 44(24):4259–4267.

Campos I, Palomar-Pardavé M, Amador A, VillaVelázquez C, Hadad J. 2007. Corrosion behavior of boride layers evaluated by the EIS technique. Appl. Surf. Sci., 253(23):9061–9066.

Chen B, Guizar-Sicairos M, Xiong G, Shemilt L, Diaz A, Nutter J, Burdet N, Huo S G, Mancuso J, Monteith A, Vergeer F, Burgess A, Robinson I. 2013. Threedimensional structure analysis and percolation properties of a barrier marine coating. Sci. Rep., 3: 1177.

Chen S Q, Wang P, Zhang D. 2014. Corrosion behavior of copper under biofilm of sulfate-reducing bacteria. Corros. Sci., 87: 407–415.

Cheng Y L, Zhang Z, Cao F H, Li J F, Zhang J Q, Wang J M, Cao C N. 2004. A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers. Corros. Sci., 46(7):1649–1667.

Conde A, de Damborenea J J. 2002. Electrochemical impedance spectroscopy for studying the degradation of enamel coatings. Corros. Sci., 44(7):1555–1567.

Doherty M, Sykes J M. 2004. Micro-cells beneath organic lacquers: a study using scanning Kelvin probe and scanning acoustic microscopy. Corros. Sci., 46(5):1265–1289.

Ecco L G, Li J, Fedel M, Deflorian F, Pan J. 2014. EIS and in situ AFM study of barrier property and stability of waterborne and solventborne clear coats. Prog. Org. Coat., 77 (3): 600–608.

Fekry A M, Mohamed R R. 2010. Acetyl thiourea chitosan as an eco-friendly inhibitor for mild steel in sulphuric acid medium. Electrochim. Acta, 55(6):1933–1939.

Fouda A S, Soliman A H. 2015. Corrosion protection of carbon steel in hydrochloric acid solutions usingthiourea derivatives. Protection of Metals and Physical Chemistry of Surfaces, 51 (5): 847–860.

Gergely A, Pászti Z, Hakkel O, Drotár E, Mihály J, Kálmán E. 2012. Corrosion protection of cold-rolled steel with alkyd paint coatings composited with submicron-structure typespolypyrrole-modified nano-size alumina and carbon nanotubes. Materials Science and Engineering: B, 177(18):1571–1582.

Gonçalves G S, Baldissera A F, Rodrigues L F Jr, Martini E M A, Ferreira C A. 2011. Alkyd coatings containing polyanilines for corrosion protection of mild steel. Synthetic Metals, 161 (3-4): 313–323.

Han W, Pan C, Wang Z Y, Yu G C. 2014. A study on the initial corrosion behavior of carbon steel exposed to outdoor wet-dry cyclic condition. Corros. Sci., 88: 89–100.

Jorcin J B, Aragon E, Merlatti C, Pébère N. 2006. Delaminated areas beneath organic coating: alocal electrochemical impedance approach. Corros. Sci., 48(7):1779–1790.

Karthik D, Tamilvendan D, Venkatesa Prabhu G. 2014. Study on the inhibition of mild steel corrosion by 1,3-bis-(morpholin-4-yl-phenyl-methyl)-thiourea in hydrochloric acid medium. J. Saudi Chem. Soc., 18 (6): 835–844.

Lin J C, Chang S L, Lee S L. 1999. Corrosion inhibition of steel by thiourea and cations under incomplete cathodic protection in a 3.5% NaCl solution and seawater. J. Appl. Electrochem., 29 (8): 911–918.

Pilbáth A, SzabóT, Telegdi J, Nyikos L. 2012. SECM study of steel corrosion under scratched microencapsulated epoxy resin. Prog. Org. Coat., 75 (4): 480–485.

Raps D, Hack T, Wehr J, Zheludkevich M L, Bastos A C, Ferreira M G S, Nuyken O. 2009. Electrochemical study of inhibitor-containing organic-inorganic hybrid coatings on AA2024. Corros. Sci., 51(5):1012–1021.

Saremi M, Yeganeh M. 2014. Application of mesoporous silica nanocontainers as smart host of corrosion inhibitor in polypyrrole coatings. Corros. Sci., 86: 159–170.

Schneider O, Kelly R G. 2007. Localized coating failure of epoxy-coated aluminium alloy 2024-T3 in 0.5 M NaCl solutions: correlation between coatingdegradation, blister formation and local chemistry within blisters. Corros. Sci., 49 (2): 594–619.

Shao Y W, Jia C, Meng G Z, Zhang T, Wang F H. 2009. The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel. Corros. Sci., 51 (2): 371–379.

Shi W, Dong Z H, Kong D J, Guo X P. 2013. Application of wire beam electrode technique to investigate initiation and propagation of rebar corrosion. Cement Concrete Res., 48: 25–33.

Tan Y J, Aung N N, Liu T. 2006a. Novel corrosion experiments using the wire beam electrode. (I) Studying electrochemical noise signatures from localized corrosion processes. Corros. Sci., 4 8(1): 23–38.

Tan Y J, Liu T, Aung N N. 2006b. Novel corrosion experiments using the wire beam electrode: (III) Measuring electrochemical corrosion parameters from both the metallic and electrolytic phases. Corros. Sci., 4 8(1): 53–66.

Tan Y J. 1991. The effects of inhomogeneity in organic coatings on electrochemical measurements using a wire beam electrode: Part I. Prog. Org. Coat., 19 (1): 89–94.

Thu Le Q, Bonnet G, Compere C, Trong Le H, Touzain S. 2005. Modified wire beam electrode: a useful tool to evaluate compatibility between organic coatings and cathodic protection. Prog. Org. Coat., 52 (2): 118–125.

Twite R L, Bierwagen G P. 1998. Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys. Prog. Org. Coat., 33 (2): 91–100.

Wang P, Zhang D, Qiu R, Wan Y, Wu J J. 2014. Green approach to fabrication of a super-hydrophobic film on copper and the consequent corrosion resistance. Corros. Sci., 80: 366–373.

Wang T, Tan Y J. 2006. Understanding electrodeposition of polyaniline coatings for corrosion prevention applications using the wire beam electrode method. Corros. Sci., 48(8):2274–2290.

Welle A, Liao J D, Kaiser K, Grunze M, Mäder U, Blank N. 1997. Interactions of N, N'-dimethylaminoethanol with steel surfaces in alkaline and chlorine containing solutions. Appl. Surf. Sci., 119 (3-4): 185–198.

Yabuki A, Kawashima A, Fathona I W. 2014. Self-healing polymer coatings with cellulose nanofibers served as pathways for the release of a corrosion inhibitor. Corros. Sci., 85: 141–146.

Yeganeh M, Keyvani A. 2016. The effect of mesoporous silica nanocontainers incorporation on the corrosion behavior of scratched polymer coatings. Prog. Org. Coat., 90: 296–303.

Zhang B B, Zhao X, Li Y T, Hou B R. 2016. Fabrication of durable anticorrosion superhydrophobic surfaces on aluminum substrates via a facile one-step electrodeposition approach. RSC Adv., 6: 35455–35465.

Zhang J T, Hu J M, Zhang J Q, Cao C N. 2004. Studies of impedance models and water transport behaviors of polypropylene coated metals in NaCl solution. Prog. Org. Coat., 49 (4): 293–301.

Zhang K Y, Wang L D, Sun W, Liu G C. 2014. Corrosion inhibitor embedded spherical micro-pits fabricated using cetyltrimethyl ammonium bromide as etching template for self-healing corrosion protection. Corros. Sci., 88: 444–451.

Zhao X, Liu S, Wang X T, Hou B R. 2014. Surface modification of ZrO 2 nanoparticles with styrene coupling agent and its effect on the corrosion behaviour of epoxy coating.

Chin. J. Oceanol. Limnol., 32(5):1163–1171.

Zhao X, Wang J, Wang Y H, Kong T, Zhong L, Zhang W. 2007. Analysis of deterioration process of organic protective coating using EIS assisted by SOM network. Electrochem. Commun., 9(6):1394–1399.

Zheludkevich M L, Poznyak S K, Rodrigues L M, Raps D, Hack T, Dick L F, Nunes T, Ferreira M G S. 2010. Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibitor. Corros. Sci., 52 (2): 602–611.

Zhou X, Yang H Y, Wang F H. 2011. Corrosion Inhibition by Sorbitol/Diethylenetriamine Condensation Product for Carbon Steel in 3.5% NaCl Saturated Ca(OH) 2 Solution. Acta Phys. Chim. Sin., 27 (3): 647–654.

Zin I M, Lyon S B, Hussain A. 2005. Under-film corrosion of epoxy-coated galvanised steel: an EIS and SVET study of the effect of inhibition at defects. Prog. Org. Coat., 52 (2): 126–135.

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Research progress of TiO₂ photocathodic protection to metals in marine environment

Effect of co-alloying of In and Nd on the marine corrosion behavior of AZ63 magnesium alloys

Electrochemical corrosion behavior of steel in the juncture area of sea clay and sand

Electrochemical study on corrosion behaviour of steels in sand with water

Study on the corrosion peak of carbon steel in marine splash zone

Related Author

Hui XU

Youbo NAN

Xin SUN

Jizhou DUAN

Yanliang HUANG

Baorong HOU

Xiutong WANG

Ying LI

Related Institution

Key Laboratory of Marine Environmental Corrosion and Bio-fouling, Institute of Oceanology, Chinese Academy of Sciences

Open Studio for Marine Corrosion and Protection, Pilot National Laboratory for Marine Science and Technology

University of Chinese Academy of Sciences

Center for Ocean Mega-Science, Chinese Academy of Sciences

Qingdao University of Science and Technology

Address：Editorial Office of JOL, 88 Haijun Rd. Qingdao, 266000, China
Tel：+86-532-82898754 Email：jol@qdio.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰