Corrosion performance of zinc coated steel in seawater environment
|Updated:2023-05-16
|
Corrosion performance of zinc coated steel in seawater environment
Journal of Oceanology and LimnologyVol. 35, Issue 2, Pages: 423-430(2017)
Affiliations:
1. Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technologies and Engineering Chinese Academy of Sciences
2. Key Laboratory of Marine Environmental Corrosion and Bio-Fouling Institute of Oceanology Chinese Academy of Sciences
Liu, S., Zhao, X., Zhao, H. et al. Corrosion performance of zinc coated steel in seawater environment., Chin. J. Ocean. Limnol. 35, 423–430 (2017). https://doi.org/10.1007/s00343-016-5269-9
DOI:
Liu, S., Zhao, X., Zhao, H. et al. Corrosion performance of zinc coated steel in seawater environment., Chin. J. Ocean. Limnol. 35, 423–430 (2017). https://doi.org/10.1007/s00343-016-5269-9DOI:
Corrosion performance of zinc coated steel in seawater environment
摘要
Abstract
Considering the continuous exploitation of marine resources
it is very important to study the anticorrosion performance and durability of zinc coated streel (ZCS) because its increasing use as reinforcements in seawater. Tafel polarization curves and linear polarization curves combined with electrochemical impedance spectroscopy (EIS) were employed to evaluate the corrosion performance of ZCS at Qingdao test station during long-term immersion in seawater. The results indicated that the corrosion rate of the ZCS increased obviously with immersion time in seawater. The corrosion products that formed on the zinc coated steel were loose and porous
and were mainly composed of Zn5(OH)8Cl2
Zn5(OH)6(CO3)2
and ZnO. Pitting corrosion occurred on the steel surface in neutral seawater
and the rate of ZCS corrosion decreased with increasing pH.
关键词
Keywords
references
Boshkov N. 2003. Galvanic Zn–Mn alloys—electrodeposition, phase composition, corrosion behaviour and protective ability. Surface and Coatings Technology, 172 (2-3): 217–226.
Cachet C, Ganne F, Joiret S, Maurin G, Petitjean J, Vivier V, Wiart R. 2002. EIS investigation of zinc dissolution in aerated sulphate medium. Part II: zinc coatings. Electrochimica Acta, 47 (21): 3409–3422.
Cachet C, Ganne F, Maurin G, Petitjean J, Vivier V, Wiart R. 2001. EIS investigation of zinc dissolution in aerated sulfate medium. Part I: bulk zinc. Electrochimica Acta, 47 (3): 509–518.
Chen Y L, Zhang Z, Cao F H, Li J F, Zhang J Q, Wang J M, Cao C N. 2004. A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers. Corr osion Science, 46 (7): 1649–1667.
Chen Y Y, Chung S C, Shih H C. 2006. Studies on the initial stages of zinc atmospheric corrosion in the presence of chloride. Corr osion Science, 48 (11): 3547–3564.
Deslouis C, Duprat M, Tulet-Tournillon C. 1984. The cathodic mass transport process during zinc corrosion in neutral aerated sodium sulphate solutions. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 181 (1-2): 119–136.
Hamlaoui Y, Tifouti L, Pedraza F. 2010. On the corrosion resistance of porous electroplated zinc coatings in different corrosive media. Corr osion Science, 52 (6): 1883–1888.
Koç E, Kannan M B, Ünal M, Candan E. 2015. Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium-zinc binary alloys. Journal of Alloys and Compounds, 648: 291–296.
Liu S, Gu Y, Wang S L, Zhang Y, Fang Y F, Johnson D M, Huang Y P. 2013. Degradation of organic pollutants by a Co 3 O 4 -graphite composite electrode in an electro-Fentonlike system. Chinese Science Bulletin, 58 (19): 2340–2346.
Liu S, Sun H Y, Sun L J, Fan H J. 2012. Effects of pH and Cl -concentration on corrosion behavior of the galvanized steel in simulated rust layer solution. Corr osion Science, 65: 520–527.
Liu S, Sun H Y, Zhang N, Sun L J. 2013. The corrosion performance of galvanized steel in closed rusty seawater. International Journal of Corr osion, 2013: 267353.
Nam N D, Mathesh M, van Le T, Nguyen H T. 2014. Corrosion behavior of Mg–5Al–xZn alloys in 3.5 wt.% NaCl solution. Journal of Alloys and Compounds, 616: 662–668.
Panagopoulos C N, Georgiou E P, Markopoulos C. 2013. Corrosion and wear of zinc in various aqueous based environments, Corr osion Science, 70: 62–67.
Posner R, Fink N, Giza G, Grundmeier G. 2014. Corrosive delamination and ion transport along stretch-formed thin conversion films on galvanized steel. Surface and Coatings Technology, 253: 227–233.
Prosek T, Thierry D, Taxén C, Maixner J. 2007. Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions. Corr osion Science, 49 (6): 2676–2693.
Qu Q, Li L, Bai W, Yan C W, Cao C N. 2005. Effects of NaCl and NH 4 Cl on the initial atmospheric corrosion of zinc. Corr osion Science, 47 (11): 2832–2840.
Qu Q, Yan C W, Wan Y, Cao C N. 2002. Effects of NaCl and SO 2 on the initial atmospheric corrosion of zinc. Corr osion Science, 44 (12): 2789–2803.
Rosliza R, Wan Nik W B, Izman S, Prawoto Y. 2010. Anticorrosive properties of natural honey on Al–Mg–Si alloy in seawater. Current Applied Physics, 10 (3): 923–929.
Rosliza R, Wan Nik W B. 2010. Improvement of corrosion resistance of AA6061 alloy by tapioca starch in seawater. Current Applied Physics, 10 (1): 221–229.
Sun H Y, Liu S, Sun L J. 2013. A Comparative study on the corrosion of galvanized steel under simulated rust layer solution with and without 3.5wt%NaCl. International Journal of Electrochemical Science, 8 (3): 3494–3509.
Tsuru T. 2010. Various electrochemical approaches for corrosion engineering. Zairyo -to -Kankyo, 59 (11): 404–409.
Veleva L, Acosta M, Meraz E. 2009. Atmospheric corrosion of zinc induced by runoff. Corr osion Science, 51 (9): 2055–2062.
Wan Nik W B, Zulkifli M F, Rosliza R, Ghazali M J, Khaled K F. 2011. Potential of honey as corrosion inhibitor for aluminium alloy in seawater. World Applied Sciences Journal, 14 (2): 215–220.
Yeomans S R. 2004. Galvanized Steel Reinforcement in Concrete. Elsevier, Oxford. p.113–117.
Zhao X, Liu S, Wang X T, Hou B R. 2014. Surface modification of ZrO 2 nanoparticles with styrene coupling agent and its effect on the corrosion behaviour of epoxy coating. Chinese Journal of Oceanology and Limnology, 32 (5): 1163–1171.
Zou Y, Wang J, Zheng Y Y. 2011. Electrochemical techniques for determining corrosion rate of rusted steel in seawater. Corr osion Science, 53 (1): 208–216.
The trial reading is over, you can activate your VIP account to continue reading.
Electrochemical corrosion behavior of hot dip coating in artificial seawater
Dispersive liquid-liquid microextraction combined with capillary electrophoresis for simultaneous determination of five fluoroquinolone antibiotics in marine crude drugs, seawater, and seafood samples
Interlinked water and sediment microplastics in the Laizhou Bay of China
Microplastics in the seawater of the Beibu Gulf, the northern South China Sea: occurrence, sources, and ecological risk
Effects of inorganic nutrients and environmental factors on the removal of n-propylbenzene and isopropylbenzene in seawater by cryptophytes Rhinomonasreticulata S6A
Related Author
Sun Hu-yuan
Hou Bao-rong
Ma Shi-de
Wei Xu-jun
Yingying LOU
Guangli ZHAO
Jingyi YAN
Dani SUN
Related Institution
Institute of Oceanology Chinese Academy of Sciences
Nonferrous Metallurgical Department Northeastern University
College of Chemistry and Chemical Engineering, Yantai University
College of Chemistry and Chemical Engineering, Shaoxing University