Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment

Yonghong LU; Xiao LIU; Lisha WANG; Jinghong YANG; Haibo XU

doi:10.1007/s00343-021-1168-9

Your Location：

Home >

Browse articles >

Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment

Chemistry | Updated：2023-05-20

- Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment
- Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment
- 海洋湖沼学报（英文） 2022年40卷第4期页码：1437-1447
- Affiliations：
  
  1.Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education; College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao 266100, China
  2.CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062, China
- Author bio：
  
  Jinghong YANG, yangjinghong.ck@crrcgc.cc
  Haibo XU, xuwangri@163.com
- Funds：
  
  the CRRC Changchun Railway Vehicles Co., Ltd.(GYHB(12)-01-00-014(067));the Natural Science Foundation of Shandong Province, China(ZR2020MB080);© Chinese Society for Oceanology and Limnology, Science Press and Springer-Verlag GmbH Germany, part of Springer Nature 2022
- DOI：10.1007/s00343-021-1168-9
  中图分类号：
- 收稿：2021-06-04，
  
  录用：2021-7-23，
  
  网络首发：2021-08-25，
  
  纸质出版：2022-07
- Accepted：
Scan QR Code
Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment[J]. 海洋湖沼学报（英文）, 2022,40(4):1437-1447.

Yonghong LU, Xiao LIU, Lisha WANG, et al. Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment[J]. Journal of Oceanology and Limnology, 2022, 40(4): 1437-1447.
Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment[J]. 海洋湖沼学报（英文）, 2022,40(4):1437-1447. DOI： 10.1007/s00343-021-1168-9.

Yonghong LU, Xiao LIU, Lisha WANG, et al. Dry passivation of austenitic SUS 301L stainless steel against pitting corrosion in marine atmospheric environment[J]. Journal of Oceanology and Limnology, 2022, 40(4): 1437-1447. DOI： 10.1007/s00343-021-1168-9.

摘要

Abstract

Being an exclusive construction material for lightweight rail vehicles

protection from pitting corrosion in harsh marine atmospheric environment in high humidity and Cl– ion concentration is critical for austenitic SUS 301L stainless steel (SS)

especially when it inevitably suffers from mechanical damages during post disposals. Herein

an innovative dry passivation method for austenitic SUS 301L SS was established in a closed air atmosphere at low temperature and constant pressure. The process parameters were optimized

and the passivation mechanism was explained using polarization curve

electrochemical impedance spectroscopy (EIS)

X-ray photoelectron spectroscopy (XPS)

and contact angle measurement. The pitting corrosion susceptibility of the passive film prepared in a closed air chamber under 1.0×10

Pa at 80 ℃ for 80 min was evaluated in 3.5% NaCl solution and exhibited higher pitting potential and corrosion resistance

lower passivity-maintaining current density

and wettability when compared with conventional nitric acid treatment. Besides

dry passivation facilitated the repairing of the surface structural defect itself and the post-processing damage

similar to the accelerated aging of film. The decrease in oxygen concentration and convection-diffusion strengthened the preferential chromium oxidation to form a compact chromium-rich passive film to resist the aggression of Cl

–

ion.

关键词

Keywords

references

Allen G C, Dyke J M, Harris S J, Morris A. 1988. A surface study of the oxidation of type 304L stainless steel at 600 K in air. Oxidation of Metals , 29 (5-6): 391-408, https://doi.org/10.1007/BF00666841..

Carroll W M, Howley M B. 1990. The influence of temperature, applied potential, buffer and inhibitor addition on the passivation behaviour of a commercial grade 316L steel in aqueous halide solutions. Corrosion Science , 30 (6-7): 643-655, https://doi.org/10.1016/0010-938X(90)90029-5..

Cho B, Chung S, Kim K, Kang T, Park C, Kim B. 2000. Direct observation of oxygen-induced structural changes in stainless-steel surfaces. Journal of Vacuum Science & Technology B : , 18 (2): 868-872, https://doi.org/10.1116/1.591288..

Cho B, Moon S, Chung S, Kim K, Kang T, Koo B. 2001. Characterization of the diffusion properties of chromium in stainless-steel oxides by photoemission spectroscopy. Journal of Vacuum Science & Technology A , 19 (3): 998-1003, https://doi.org/10.1116/1.1368837..

Coates G E. 1990. Effect of some surface treatments on corrosion of stainless steel. Materials Performance , 29 (8): 61-65..

Crolet J L. 1997. Reply to "The effect of chromium enrichment in the film formed by surface treatments on the corrosion resistance of type 430 stainless steel": by T. Hong, T. Ogushi and M. Nagumo, Corros. Sci. 38 , 881 (1996). Corrosion Science , 39 (6): 1137-1139, https://doi.org/10.1016/S0010-938X(97)00040-1 https://doi.org/10.1016/S0010-938X(97)00040-1 . .

Gardin E, Zanna S, Seyeux A, Allion-Maurer A, Marcus P. 2018. Comparative study of the surface oxide films on lean duplex and corresponding single phase stainless steels by XPS and ToF-SIMS. Corrosion Science , 143 : 403-413, https://doi.org/10.1016/j.corsci.2018.08.009..

Greyling C J, Roux J P. 1984. Optimum conditions in the thermal passivation of AISI 430 and 304 stainless steel in controlled oxygen atmosphere. Corrosion Science , 24 (8): 675-690, https://doi.org/10.1016/0010-938X(84)90058-1..

Gui Y, Meng X B, Zheng Z J, Gao Y. 2017. Critical temperature determination of detectable Cr diffusion enhancement by nanostructure through structural evolution analysis of the oxide films at 25-450 ℃ on 304 stainless steel. Applied Surface Science , 419 : 512-521, https://doi.org/10.1016/j.apsusc.2017.04.133..

Ibrahim M A M, Abd El Rehim S S, Hamza M M. 2009. Corrosion behavior of some austenitic stainless steels in chloride environments. Materials Chemistry and Physics , 115 (1): 80-85, https://doi.org/10.1016/j.matchemphys.2008.11.016..

Långberg M, Zhang F, Grånäs E, Örnek C, Cheng J, Liu M, Wiemann C, Gloskovskii A, Keller T F, Schlueter C, Kulkarni S, Noei H, Lindell D, Kivisäkk U, Lundgren E, Stierle A, Pan J. 2020. Lateral variation of the native passive film on super duplex stainless steel resolved by synchrotron hard X-ray photoelectron emission microscopy. Corrosion Science , 174 : 108841, https://doi.org/10.1016/j.corsci.2020.108841..

Langevoort J C, Sutherland I, Hanekamp L J, Gellings P J. 1987. On the oxide formation on stainless steels AISI 304 and incoloy 800H investigated with XPS. Applied Surface Science , 28 (2): 167-179, https://doi.org/10.1016/0169-4332(87)90062-6..

Li J, Wang Q C, Yang Y X, Wu Z Q, Tan L L, Ren Y B, Yang K. 2019. Enhancing pitting corrosion resistance of severely cold-worked high nitrogen austenitic stainless steel by nitric acid passivation. Journal of the Electrochemical Society , 166 (13): C365-C374, https://doi.org/10.1149/2.0211913jes..

Liu X, He G Z, Luo J, Wang F. 2018. Study on passivation process of stainless steel vehicle. Urban Mass Transit , 21 (2): 82-83, 90. (in Chinese with English abstract).

Loto R T. 2013. Pitting corrosion evaluation of austenitic stainless steel type 304 in acid chloride media. Journal of Materials and Environmental Science , 4 (4): 448-459..

Loto R T. 2015. Pitting corrosion evaluation and inhibition of stainless steels: a review. Journal of Materials and Environmental Science , 6 (10): 2750-2762..

Lu Y H, Wang W, Xu H B, Kong X F, Wang J. 2010. Copper corrosion and anodic electrodissolution mechanisms in naturally aerated stagnant 0.5 M H 2 SO 4 . Corrosion Science , 52 (3): 780-787, https://doi.org/10.1016/j.corsci.2009.10.037..

Ma L, Pascalidou E M, Wiame F, Zanna S, Maurice V, Marcus P. 2020. Passivation mechanisms and pre-oxidation effects on model surfaces of FeCrNi austenitic stainless steel. Corrosion Science , 167 : 108483, https://doi.org/10.1016/j.corsci.2020.108483..

Noh J S, Laycock N J, Gao W, Wells D B. 2000. Effects of nitric acid passivation on the pitting resistance of 316 stainless steel. Corrosion Science , 42 (12): 2069-2084, https://doi.org/10.1016/S0010-938X(00)00052-4..

Ohmi T, Ohki A, Nakamura M, Kawada K, Watanabe T, Nakagawa Y, Miyoshi S, Takahashi S, Chen M S K. 1993. The technology of chromium oxide passivation on stainless steel surface. Journal of the Electrochemical Society , 140 (6): 1691-1699, https://doi.org/10.1149/1.2221625..

Okamoto G. 1973. Passive film of 18-8 stainless steel structure and its function. Corrosion Science , 13 (6): 471-489, https://doi.org/10.1016/0010-938X(73)90031-0..

Olefjord I, Wegrelius L. 1990. Surface analysis of passive state. Corrosion Science , 31 : 89-98, https://doi.org/10.1016/0010-938X(90)90095-M..

Rahimi E, Rafsanjani-Abbasi A, Davoodi A, Hosseinpour S. 2019. Characterization of the native passive film on ferrite and austenite phases of sensitized 2205 duplex stainless steel. Journal of the Electrochemical Society , 166 (16): C609-C616, https://doi.org/10.1149/2.1371915jes..

Salvago G, Fumagalli G. 1994. The distribution of stainless steel breakdown potentials: The effect of surface finishing degree and HNO3 treatment. Corrosion Science , 36 (4): 733-742, https://doi.org/10.1016/0010-938X(94)90077-9..

Samsonov G V. 1982. The Oxide Handbook. IFI/Plenum, New York. 463p.

Sun X G, Han X H, Zhang X S, Zhang Z Y, Li G Q, Dong C F. 2019. Corrosion resistance and environmentally-friendly chemical passivation of welded joints for ultra-low carbon austenitic stainless steel. Journal of Chinese Society for Corrosion and Protection , 39 (4): 345-352. (in Chinese with English abstract).

Wallinder D, Pan J, Leygraf C, Delblanc-Bauer A. 1998. EIS and XPS study of surface modification of 316LVM stainless steel after passivation. Corrosion Science , 41 (2): 275-289, https://doi.org/10.1016/S0010-938X(98)00122-X..

Wang Z C, Di-Franco F, Seyeux A, Zanna S, Maurice V, Marcus P. 2019. Passivation-induced physicochemical alterations of the native surface oxide film on 316L austenitic stainless steel. Journal of the Electrochemical Society , 166 (11): C3376-C3388, https://doi.org/10.1149/2.0321911jes..

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Corrosion behavior of Q235B carbon steel in simulated seawater pumped storage system under operational conditions

离子推力器放电室阳极壁面电流密度分布特性研究

双转子轴间滑油颗粒运动轨迹参数化模型

高压涡轮封严流与主流相互作用的机理研究

2.5D编织结构复合材料温度场特征研究